Canon MV MV4 Скачать руководство пользователя страница 136

Страница: 136 / 156

136

Additional

Information

• The video heads need cleaning

(

131).

• The video heads need cleaning

(

131).

• The TV/VIDEO selector on the TV

isn’t set to VIDEO (

27).

• The speaker has been turned off with

the SELECT dial (

26).

• Headphones are being used.

The playback picture is rough
(with mosaic-like noise).

There’s no picture on the TV
screen, even though the tape is
moving.

There’s no sound coming from the
speaker during playback.

Memory card operations MV4i MC only

Cause and/or what to do about it

• It is not turned the right way (

99).

Turn it the right way and try inserting
again.

• Turn the camcorder's power off and

back on again and remove and
reinsert the card. If the mark
continues to flash, format the
memory card.

• The POWER dial is not set to CARD

REC or CARD PLAY (

103, 107).

• The memory card is not inserted

(

109).

• You are using an SD Memory Card and

it is set for erasure prevention. Change
the position of the protect switch.

• The memory card is full. Erase

images (

115) or insert a new

memory card.

• The power source is not properly

connected (

9), or the battery pack

is exhausted or not properly attached
(

10).

• The function can not be used in that

recording program (

53).

Problem

The memory card will not insert.

The

mark flashes red in the

display even though a memory
card has been inserted.

Nothing happens when I press the
buttons.

#6_MV4/MV4 MC-i_E(126-155) 01/7/31 10:38 Page 136 (1,1)

Содержание MV MV4





























































































































































Результаты поиска

Содержание MV MV4

Отзывы:

Похожие инструкции для MV MV4

Бренды по названию

Популярные бренды

Canon MV MV4, Инструкция

Результаты поиска

Содержание MV MV4

Отзывы:

Похожие инструкции для MV MV4

Бренды по названию

Популярные бренды