Canon mf6600 Series, Руководство по обслуживанию

Страница: 199 / 227

8
8
8-12
8-12
Service Mode > Service Soft Switch Settings (SSSW) > SSSW-SW30 > Detailed Discussions of Bit 5
Service Mode > Service Soft Switch Settings (SSSW) > SSSW-SW30 > Detailed Discussions of Bit 5
SSSW-SW28
List of Functions
Bit Function 1 0
0 Caller V.8 protocol NO
YES
1 Called party V.8 protocol NO
YES
2 Caller V.8 protocol late start NO
YES
3 Called party V.8 protocol late start NO
YES
4 V.34 reception fallback Prohibited Not prohibited
5 V.34 transmission fallback Prohibited Not prohibited
6 not used - -
7 not used - -
Detailed Discussions of Bit 0
Select whether to use the V.8 protocol when calling. If NO is selected, the V.8 protocol is
inhibited at calling and the V.21 protocol is used.
Detailed Discussions of Bit 1
Select whether to use the V.8 protocol when called. If NO is selected, the V8 protocol is
inhibited when called and the V.21 protocol is used.
Detailed Discussions of Bit 2
If ANSam signal is not received during transmission, select whether to use the V.8 protocol
when the other fax machine declares the V.8 protocol in DIS signal. If NO is selected, the
CI signal is not transmitted and the V.8 protocol is not used even if the DIS that specifies
the V.8 protocol is received.
The V.8 late start is not executed during manual transmission regardless of this setting.
Detailed Discussions of Bit 3
Select whether to declare the V.8 protocol in DIS signal for reception. If NO is selected, the
V.8 protocol cannot be used because it is not declared in DIS signal.
The V.8 late start is not executed during manual reception regardless of this setting.
■
■
■
■
■
T-8-28 T-8-28
Detailed Discussions of Bit 4
Select whether the receiver falls back during V.34 reception. If 'Prohibit' is selected, the
receiver does not fall back.
Detailed Discussions of Bit 5
Select whether the transmitter falls beck during V.34 transmission. If 'Prohibit' is selected,
teh transmitter does not fall back.
SSSW-SW30
List of Functions
Bit Function 1 0
0 Not used - -
1 Not used - -
2 Not used - -
3 Not used - -
4 Not used - -
5
New dial tone detection
method
Detect with the new
method.
Detect with the existing
method.
6 Not used - -
7 Not used - -
Detailed Discussions of Bit 5
When "Detect with the new method" is selected, tone is detected for 3.5 seconds before
call origination in order to discriminate between dial tone and voice. If dial tone is detected
and the time since line seizure is 3.5 seconds or longer, call origination takes place
immediately. If the time since line seizure is less than 3.5 seconds, call origination takes
place after waiting for 1 second. (If the time since line seizure reaches 3.5 seconds during
the 1-second waiting period, call origination takes place immediately. By default, "Detect
with a new method" is assigned for this SW.
■
■
■
■
T-8-29 T-8-29