![background image](http://html1.mh-extra.com/html/canon/lv-s3-svga-lcd-projector/lv-s3-svga-lcd-projector_specification_4026216016.webp)
7.49 Presentation Timer Command
Command “C8A” [CR]
Detail
Set a presentation timer to active.
This command works the same as the remote control’s “P-TIMER” button.
Acceptable
[ACK] [CR]
Response
Unacceptable “?” [CR]
7.50 Keystone
Up
Command
Command “C8E” [CR]
Detail
Adjust keystone. Make the screen image length at the top edge shorter.
Acceptable
[ACK] [CR]
Response
Unacceptable “?” [CR]
7.51 Keystone
Down
Command
Command “C8F” [CR]
Detail
Adjust keystone. Make the screen image length at the bottom edge shorter.
Acceptable
[ACK] [CR]
Response
Unacceptable “?” [CR]
8. State Read Command
8.1 Format
8.1.1 A PC issues commands fin format as below.
“C
R
COMMAND [CR]
Command: 1 character (See Basic Status Read Command Table)
8.1.2 When a projector receives the appropriate command, it returns a character line as the
required data.
Required Data [CR]
Required Data: A character line (See Basic Status Read Command Table)
8.1.3 When receiving data cannot be decode, the projector returns, ““?” [CR].
Page
16/21