7.4 Operation Requirements
When the projector’s status in this below, functional execution commands are limited.
Status Read Commands are available even in this table status.
Projector Status
Available Functional Execution Commands
StandBy Mode
C00: Power ON
Processing Countdown
C00: Power ON
(Terminate Countdown)
Processing Cooling Down
N/A
Processing Cooling Down due to abnormal
temperature.
N/A
Abnormal Temperature Status
N/A
Processing Mode Change
N/A
Processing Power Save/Cooling Down
N/A
Processing Power Save
C00: Power ON
C01: Power OFF
Note) When the status is above, even if the projector receives other command in the above
status, the projector returns [ACK] [CR].
7.5 Power ON Command
Command “C00” [CR]
Detail
Power ON
When already Power ON, no need to do.
When sending this command during processing Count Down, Count Down is
terminated.
Acceptable
[ACK] [CR]
Response
Unacceptable “?” [CR]
7.6 Power OFF Command
(
Quick Power OFF
)
Command “C01” [CR]
Detail
Power OFF (Stand By)
When Power OFF with ON-OFF button of the projector or the remote control,
“Power OFF” will be displayed. However, as soon as this command is sent,
Quick Power OFF is executed.
Acceptable
[ACK] [CR]
Response
Unacceptable “?” [CR]
7.7 Power OFF Command
Command “C02” [CR]
Detail
Power OFF (Stand By)
When Power OFF with ON-OFF button of the projector or the remote control,
“Power OFF” will be displayed. However, as soon as this command is sent,
Power OFF is executed.
Acceptable
[ACK] [CR]
Response
Unacceptable “?” [CR]
Page
8/21