Canon LEGRIA HF R506, Инструкция по эксплуатации

Страница: 157 / 193

Additional Information
Š 157
The battery pack is exhausted extremely quickly even at normal temperatures.
- The battery may have reached the end of its battery life. Buy a new battery pack.
Recording
Pressing
Y
will not start recording.
- You cannot record while the camcorder is writing previous recordings onto the memory (while
the ACCESS indicator is on or flashing). Wait until the camcorder has finished.
- The memory is full or it already contains the maximum number of AVCHD movies (3,999
scenes). Delete some recordings (
A
51) or initialize the memory (
A
27) to free some
space.
- The file or folder number has reached its maximum value. Save your recordings (
A
101),
set
1
> q > [File Numbering] to [Reset] and initialize the memory ( A 27).
The point where
Y
was pressed does not match the beginning/end of the
recording.
- There is a slight interval between pressing
Y
and the actual start/end of record-
ing. This is not a malfunction.
The camcorder will not focus.
- Autofocus does not work on the subject. Focus manually (
A
73).
- The lens is dirty. Clean the lens (
A
176).
When a subject flits across in front of the lens, the image appears slightly bent.
- This is a phenomenon typical of CMOS image sensors. When a subject crosses very quickly in
front of the camcorder, the image may seem slightly warped. This is not a malfunction.
Changing the operating mode between recording ( Ü )/recording standby ( Ñ )/playback ( Ð )
takes longer than usual.
- When the memory contains a large number of scenes, some operations may take longer than
usual. Save your recordings (
A
101) and initialize the memory (
A
27).
Movies or photos cannot be recorded properly.
- This may occur as movies and photos are recorded/deleted over time. Save your recordings
(
A
101) and initialize the memory using the [Complete Initialization] option (
A
27).
Cannot record a photo while recording movies.
- You cannot take photos in mode or while fading in or fading out a scene (
A
71).
After using the camcorder for a long time, it becomes hot.
- The camcorder may become hot after using it continuously for long periods of time; this is not
a malfunction. If the camcorder becomes unusually hot or it becomes hot after using it only for
a short while, it may indicate a problem with the camcorder. Consult a Canon Service Center.
COP
Y