164
Additional Information
Charge the battery pack
- Battery pack is exhausted. Charge the battery pack.
Check the memory card
- Cannot access the memory card. Check the memory card and make sure it is inserted cor-
rectly.
- A memory card error occurred. The camcorder cannot record or display the image. Try remov-
ing and reinserting the memory card, or use a different memory card.
- You inserted a MultiMedia Card (MMC) into the camcorder. Use a recommended memory card
(
A
25).
- If after the message disappears,
appears in red, perform the following: Turn off the cam-
corder and remove and reinsert the memory card. If
turns back to green you can resume
recording/playback. If the problem persists, save your recordings (
A
108) and initialize the
memory card (
A
31).
Check whether the lens cover is open
- Slide the lens cover switch down.
Do not disconnect the power source. Do not disconnect the USB cable unless you first use
the computer to safely end the connection.
- When the camcorder is in
mode and is connected to the computer with the supplied
USB cable, the camcorder cannot be operated. Disconnecting the USB cable or power source
while this message appears may result in permanent loss of the recordings in the camcorder.
Use the computer’s Safely Remove Hardware function to end the connection and disconnect
the USB cable before using the camcorder.
File name error
- The folder and file numbers have reached their maximum value. Set
>
q
>
[File
Numbering] to [Reset] and delete all the MP4 movies (
A
56) and photos (
A
57) on the
memory card or initialize it (
A
31).
Initialize only using the camcorder
- There is a problem with the file system that prevents accessing the selected memory. Initialize
the memory with this camcorder (
A
31).
LCD Screen has been dimmed Use the [LCD Backlight] setting to change the brightness
- Change the
>
>
[LCD Backlight] setting to [Normal] or [Bright].
May not be possible to record movies on this memory card
- You may not be able to record movies on a memory card without a Speed Class rating or with
one rated SD Speed Class 2. Replace the memory card with one rated SD Speed Class 4, 6 or
10.
Mem. Card Number of scenes already at maximum
- The memory card already contains the maximum number of AVCHD scenes (3,999 scenes);
no further scenes can be copied onto the memory card. Delete some scenes (
A
55) to free
some space.
COP
Y
Downloaded From VideoCamera-Manual.com Manuals