2
2
2-33
2-33
Technology > MEAP > Resource Information > About MEAP Application Management Page
Technology > MEAP > Resource Information > About MEAP Application Management Page
Note:
There are two ways to install an MEAP application. You can install using SMS, or install
using the [Register/Update Software] screen of the remote UI.
Screen example
[Register/Update Software] provides two types of installations. One is [Manual
Installation] where you specify a jar file and a license file and then install. The other is
[Delivered Installation] where you enter a license access number.
For details of the procedures, please refer to the e-Manual.
F-2-65
Resource Information
■
About MEAP Application Management Page
Application Management page shows [ resource information ] for information of the whole
device resources including Amount Used, Remaining, and Percent Used.
This function enables users to judge the remaining resources before installing the additional
application. Such resource information is shown based on the manifest header stated at the
top of each application, which declares the resources required in the application. Therefore,
the information does not necessarily show the resources actually in use.
The following resource information is shown:
• Storage
• Memory
• Thread
• Socket
• File Descriptor
You will not be able to install an application if the size of the remaining disk space falls short
of the size declared by the application. Moreover, the specifications have been designed so
that an application will not be able to start up if there is a shortage of memory for any of the
foregoing items (i.e., memory, thread, socket, file descriptor).
Follow the steps below to check the remaining memory:
1) Log in to SMS.
2) Click [ MEAP Application Management ].
3) Check [ Resource Information ] for information of the whole device resources.
F-2-66
