Canon LBP6670dn Series Скачать руководство пользователя страница 160

Страница: 160 / 181

5-41

Trouble Shooting > Updater > Overview > Error Messages

No.

Messages

Timing of display

Cause

Remedy

12 An error occurred. Check the Update

Firmware screen.

UGW linkage (main

screen)

eRDS sent an order but Updater failed to connect

to server.

Conduct a communication test to analyze the cause of the error. After solving the cause,

resend the order from the eRDS.

If it recurs, obtain the log etc. (Refer to "System Management Operations" under “Version

Upgrade”of "Updater" in Chapter 6 “Troubleshooting” of this manual.) and contact

Support Div. of the sales company.

Delivery server stopped.

Contact the sales company's Support Department.

After confirming restoration of the delivery server, re-execute the job.

If it recurs, obtain the log etc. (Refer to "System Management Operations" under “Version

Upgrade”of "Updater" in Chapter 6 “Troubleshooting” of this manual.) and contact

Support Div. of the sales company.

Scheduled date and time acquired from the delivery

server was before current time (15 or more min had

passed.)

Do the delivery setting from UGW again.

If it recurs, obtain the log etc. (Refer to "System Management Operations" under “Version

Upgrade”of "Updater" in Chapter 6 “Troubleshooting” of this manual.) and contact

Support Div. of the sales company.

Scheduled data and time acquired from the delivery

server did not exist.

Do the delivery setting from UGW again.

If it recurs, obtain the log etc. (Refer to "System Management Operations" under “Version

Upgrade”of "Updater" in Chapter 6 “Troubleshooting” of this manual.) and contact

Support Div. of the sales company.

Immediate download

(main screen)

At the time of immediate download, turned OFF and

then ON the power of device main body.

Re-execute the job.

If it recurs, obtain the log etc. (Refer to "System Management Operations" under “Version

Upgrade”of "Updater" in Chapter 6 “Troubleshooting” of this manual.) and contact

Support Div. of the sales company.

Manual update (main

screen)

Automatic update (main

screen)

Updated version was different from the ordered

version.

Re-execute the job.

If it recurs, obtain the log etc. (Refer to "System Management Operations" under “Version

Upgrade”of "Updater" in Chapter 6 “Troubleshooting” of this manual.) and contact

Support Div. of the sales company.

After the update, failed to connect to the delivery

server.

Check the network environment and re-execute the job.

If it recurs, obtain the log etc. (Refer to "System Management Operations" under “Version

Upgrade”of "Updater" in Chapter 6 “Troubleshooting” of this manual.) and contact

Support Div. of the sales company.

After the update, delivery server stopped.

Contact the sales company's Support Department. After confirming restoration of the

delivery server, re-execute the job.

If it recurs, obtain the log etc. (Refer to "System Management Operations" under “Version

Upgrade”of "Updater" in Chapter 6 “Troubleshooting” of this manual.) and contact

Support Div. of the sales company.

After the update, the network cable was

disconnected.

Re-connect the network cable and re-execute the job.

If it recurs, obtain the log etc. (Refer to "System Management Operations" under “Version

Upgrade”of "Updater" in Chapter 6 “Troubleshooting” of this manual.) and contact

Support Div. of the sales company.

After the update, server returned an error.

Obtain the log etc. (Refer to "System Management Operations" under “Version

Upgrade”of "Updater" in Chapter 6 “Troubleshooting” of this manual.) and contact

Support Div. of the sales company.

After the update, an internal error occurred.

If it recurs, obtain the log etc. (Refer to "System Management Operations" under “Version

Upgrade”of "Updater" in Chapter 6 “Troubleshooting” of this manual.) and contact

Support Div. of the sales company.

Содержание LBP6670dn Series






















































































































































































Результаты поиска

Содержание LBP6670dn Series

Отзывы:

Похожие инструкции для LBP6670dn Series

Бренды по названию

Популярные бренды

Canon LBP6670dn Series, Руководство по обслуживанию

Результаты поиска

Содержание LBP6670dn Series

Отзывы:

Похожие инструкции для LBP6670dn Series

Бренды по названию

Популярные бренды