Canon LBP-1760, Руководство пользователя

Страница: 217 / 234

209
Glossary
F
factory default
A value programmed into the printer’s memory at the factory before shipping. The
value is permanently stored in ROM (read only memory) and cannot be modified by
the user. Unless you change the settings, factory default settings are enabled every
time you turn the printer on. See also default.
fixed spacing
Used in a fixed font where all the characters are of the same width. Fixed spacing is
also referred to as pitch and is measured in characters per inch.
Flash ROM
Additional memory that is used to store font and macro data. Use of additional Flash
ROM memory requires the purchase and installation of the Canon Flash ROM Module
FR5.
font
A complete set of characters of the same size and style; all the letters, numbers,
punctuation marks and symbols have a similar appearance.
font list
Lists all the fonts currently available in the printer. Available PCL fonts and
PostScript fonts are listed separately.
form feed
A printer command that stops printing on a page and ejects the page from the printer.
If this command is not sent from the host computer at page end, unprinted data may
remain in the printer. If a print job is completed and the
On Line
indicator continues
to blink, there is unprinted data in the print. Press Shift and Go to print all the data
remaining in the printer.
free RAM
The total amount of RAM currently available in the printer for downloading fonts from
the host computer, registering overlay forms, etc.
fuser assembly
Fixes the toner onto the paper or other media with heat and pressure. Located inside
the printer, the fuser assembly reaches temperatures of 190
°
C (374
°
F) during
operation.