Canon LBP-1760, Руководство пользователя

Страница: 80 / 234

72
CONFIG MENU
Shaded menus appear after an option has been installed. E.g. A5 module with the
Adobe PostScript 3 software or Network cards.
If there is insufficient memory, MEMCONFIG may not appear, even after the A5
module has been installed.
Press Go to take the printer off-line
Press Menu to display the first menu name
Jam recovery allows printing to resume automatically once a paper jam has been
removed. Jam recovery can be set for PCL and PostScript personalities.
OFF The printer does not resume printing automatically after the paper
jam has been removed. You must start the print again. You may
want to use this setting to conserve memory.
ON The printer reserves enough memory to hold the data for the page
that jams and automatically reprints the page that jammed. With
this setting, printing speed is slightly slower. Use this setting if
there is sufficient memory available.
AUTOCONT (automatic continue) determines how the printer reacts to errors. If the
printer is part of a network or remote spooling system, then set AUTOCONT=ON.
ON
The printer displays a message, goes off-line for about 10 seconds
and then automatically goes back on-line and resumes printing.
OFF
The printer displays a message, goes off-line and waits for you to
correct the problem. Press
Go
to resume operation.
The Standard Printing Environment Settings
CONFIG MENU
JAMRECOVERY=OFF *
CONFIG MENU
AUTOCONT=ON
*