Canon ITS-ME, Руководство по эксплуатации

Страница: 51 / 114

E17
5 OPERATION
5-1-5. MACRO OPERATION (TIS-ME type only)
When the macro function of the lens is used, macro shooting is enabled. In macro shooting, the
object distance becomes shorter than the normal minimum object distance (M.O.D.).
The minimum object distance by macro operation for this lens is 10 mm at widest angle.
Press the macro button to unlock the macro ring.
While holding the button down, turn the macro
ring at the back side of the lens clockwise as
viewed from the camera side to allow macro
shooting.
1
Set the lens to the widest angle by manual or
servo zoom operation.
↓
2
Bring the object into focus by turning the macro
ring.
NOTE
Macro operation is also possible at any zoom position
other than the widest angle, but the object distance
increases.
Multi-point Focus Shooting
In macro shooting, when zooming to change the focal length, the focal point varies. The multi-point
focus shooting technique uses this characteristic. The focal point is shifted by the zoom operation.
Follow the steps bellow :
1
Zoom in to a far object, and bring it into focus by normal focus operation.
↓
2
Zoom out to a near object and bring into focus by macro operation.
↓
3
Zoom in to the far object again while not touching the macro button set by above step 2, and bring into
focus again by normal focus operation.
When steps
1
to
3
have been performed, the setting for multi-point focus shooting is completed.
When zooming in, the focal point is shifted from the object in the foreground to the farther object in
the background continuously.
Macro ring
Macro button