Canon iR6570 series, Процедура установки, Страница: 21 / 62

Chapter 1
13
F-1-20
3) Pushing the front and the rear of the transfer/
separation corona assembly, pull out the assembly
to the front and remove it in the direction of upper
left.
F-1-21
Be aware not to cut the nylon wire by coming into
contact the transfer/separation corona assembly to the
transfer guide.
4) Check the transfer/separation corona assembly, if
dirt or paper dust adhere to the assembly, clean it
using alcohol
5) Mount the assembly in reverse order from
removing and fix it.
6) Attach the feeder assembly front cover (Right)
using the two screws, and slide the fixing feeder
assembly and the duplexing unit into the machine.
(The fixing feeder assembly release lever remains
released.)
7) Open the toner supply cover.
8) Remove the toner supply cover [2] using the two
screws [1].
F-1-22
9) Remove the connector cover [2] using the screw
[1].
F-1-23
10) Remove the two screws [1] and the connector [2],
and pull out the primary fan duct [3].
F-1-24
[1] [2]
[3]
1
2
[1] [1]
[2]
[1] [2]
[1]
[2]
[3]