Canon iR6570 series, Процедура установки, Страница: 18 / 62

Chapter 1
10
enough to remove the pad. (The machine weight:
Approx. 215kg)
F-1-10
4) Hold the two grips at the pick-up assembly (front/
rear), and lift the main body with them slightly
enough to remove the pad.
F-1-11
5) Remove the cardboard box on the skid, and take out
the two slope plates, which have been stored in the
center of skid.
If it is difficult to take out the slope plates, move the
main body to the trailing edge of the skid.
6) Turn the slope plates upside down, match the
pinholes of the skid to those of the slope plates, and
inlet the pin to the hole respectively.
F-1-12
7) Hold the two grips (front/rear) of the main body,
slide the main body on the slopes, and take it down
from the skid.
Be aware that the wheels will not be dropped out of
the skid.
8) Remove the grips attached using an appropriate
tool (e.g.: a flat-blade screwdriver) while pushing
the leaf spring.