manualshive.com logo in svg

Canon IR5000 - iR B/W Laser, Руководство по обслуживанию

Поделиться
Скачать
Canon IR5000 - iR B/W Laser Скачать руководство пользователя страница 574

COPYRIGHT © 2000 CANON INC. 

2000 2000 2000 2000

 CANON iR5000/iR6000 REV.0 JULY 2000

CHAPTER 3 STANDARDS AND ADJUSTMENTS

3-9 T

4. Pickup/Feeding System

4.1 Orientation of the Deck/Cassette Pickup Roller

The pickup roller may be mounted by reversing the steps used to remove it; however, be

sure to keep the following in mind:
•

The pickup rollers used at the front and the rear of the machine are not interchangeable.

•

The collar of the pickup roller used at the front of the machine is gold-colored.

When mounting the pickup roller [1] to the pickup assembly, make sure that the round

marking [2] found on the side of the roller and the round marking [3] found on the collar
(gold-colored) are toward the front of the machine.

F03-401-01

•

The collar of the pickup roller used at the rear of the machine is silver-colored. When
mounting the pickup roller [4] to the pickup assembly, make sure that the round mark-
ing [5] found on the side o the roller is toward the front of the machine while the round
marking on the collar (silver-colored) is toward the rear of the machine.

F03-401-02

(direction of rotation)

[1]

Collar (gold-colored)

(front of machine)

[2]

[3]

[4]

[5]

[6]

(direction of rotation)

Collar (silver-colored)

(rear of machine)

Download Free Service Manual at http://printer1.blogspot.com

Содержание IR5000 - iR B/W Laser








































































































































































































































































































































































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды