manualshive.com logo in svg

Canon IR5000 - iR B/W Laser, Руководство по обслуживанию

Поделиться
Скачать
Canon IR5000 - iR B/W Laser Скачать руководство пользователя страница 361

COPYRIGHT © 2000 CANON INC. 

2000 2000 2000 2000

 CANON iR5000/iR6000 REV.0 JULY 2000

CHAPTER 5 PICK UP/FEEDING SYSTEM

5-62 P

2) While keeping the lifter motor M20

(M21) [3] to the right, tighten the screw
[4] temporarily.

F05-902-22

3) Set the cassette 3 (cassette 4) in the ma-

chine without paper.

4) Check to make sure that the lifter drive

gear [5] is engaged with the lifter motor
gear [6] from the right side of the ma-
chine; then, check also to make sure
that the lifter drive gear is fully away
from the lifter gear when the release
button [7] of the cassette 3 (cassette 4)
is pressed halfway.

The expression “pressing the
release button halfway” means
the following:
• The separation roller moves

down.

• The cassette is about to slide

out.

F05-902-23

5) If the filter drive gear is not fully away

from the lifter motor gear, move the left
motor M20 (M21) [7] to the left, and
press the release button halfway once
again to make a check.

F05-902-24

[3]

[4]

[7]

[5]

[6]

[7]

Download Free Service Manual at http://printer1.blogspot.com

Содержание IR5000 - iR B/W Laser








































































































































































































































































































































































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды