manualshive.com logo in svg

Canon IR5000 - iR B/W Laser, Руководство по обслуживанию

Поделиться
Скачать
Canon IR5000 - iR B/W Laser Скачать руководство пользователя страница 402

COPYRIGHT © 2000 CANON INC. 

2000 2000 2000 2000

 CANON iR5000/iR6000 REV.0 JULY 2000

CHAPTER 6 FIXING SYSTEM

6-21 P

[1]

[2]

[3]

[1]

[7]

[4]

[5]

[6]

[4]

[5]

[6]

4.1 Fixing Assembly

4.1.1 Removing the Fixing/Feeding Unit

1) Slide the duplex feeding unit out of the

machine.

2) Remove the three screws [1], and two

knobs [2], and detach the duplex feed-
ing unit front cover [3].

F06-401-01

3) Slide the fixing/feeding unit out of the

machine.

4) While pressing the stoppers [5] on both

ends of the fixing/feeding unit slide rail
[4], pull the fixing/feeding unit farther
toward the front.

5) With the fixing/feeding unit fully out,

insert a think screwdriver into the hole
[6] of the rails on both sides; then,
while releasing the stoppers, pull the
fixing/feeding unit [7] to the front to
detach.

To slide in the unit, fit the part
of the slide rails into the rails of
the machine, and push the unit
straight inside.

F06-401-02

Download Free Service Manual at http://printer1.blogspot.com

Содержание IR5000 - iR B/W Laser








































































































































































































































































































































































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды