Canon IR5000 - iR B/W Laser Скачать руководство пользователя страница 430

Страница: 430 / 839

2000 2000 2000 2000

CANON iR5000/iR6000 REV.0 JULY 2000

CHAPTER 7 EXTERNALS AND CONTROLS

7-5 P

3. Power Supply

3.1 Power Supply

3.1.1 Outline

The machine’s DC power supply is controlled by the DC power supply PCB; the associ-

ated PCBs, parts, functions, and arrangement of distribution are as follows:

T07-301-01

Name

DC power supply PCB

Rush current prevention
PCB
Fuse PCB

Main power switch
(SW1)
Environment switch
(SW3)

Cassette heater switch
(SW4)
Main relay (RL1)

Description

• Generates DC power from AC power.
• Protects against overcurrent.
• Limits rush current to the fixing/feeding assembly, duplexing

unit, and high-voltage PCB.

• Protects the lens heater (H6) and mirror heater (H7) against

overcurrent.

• Serves as the power switch of a load other than the drum

heater (H3), cassette heater (H4), and deck heater (H5).

• When off, the drum heater (H3) operates in conjunction with

the turning on/off of the main power switch; if on, the drum
heater (H3) will remain powered at all times.

• Serves as the switch to turn on/off the cassette heater (H4)

and deck heater (H5).

• Cuts off the AC line to the fixing heater and AC driver.

Download Free Service Manual at http://printer1.blogspot.com

Содержание IR5000 - iR B/W Laser

















































































































































































































































































































































































































































































































































































































































































































































































































































Результаты поиска

Содержание IR5000 - iR B/W Laser

Отзывы:

Бренды по названию

Популярные бренды

Canon IR5000 - iR B/W Laser, Руководство по обслуживанию

Результаты поиска

Содержание IR5000 - iR B/W Laser

Отзывы:

Бренды по названию

Популярные бренды