Canon iR2270 Series, Руководство по обслуживанию

Страница: 893 / 1008

Chapter 16
16-49
T-16-34
<CST>
T-16-35
<FIXING>
COPIER > FUNCTION > DPC
Sub-item Description Level
D-
GAMMA
Controlling photoconductor drum resistance measurement (APVC)
Note: Execute this mode only in the following cases and skip it when
unnecessary.
- Adjustment if the drum unit has been replaced
- Fault isolation if automatic copy density adjustment (PD-ME) has
ended abnormally
- Reference for checking the drum endurance
1
<Operating procedure>
1) Select an item and press the OK key.
2) Automatic control terminates after outputting one blank copy.
3) Select DISPLAY>HV-STS>PRIMARY to display the
measurement results.
COPIER > FUNCTION > CST
Sub-item Description Level
MF-A4R
MF-A6R
MF-A4
Registering the basic paper width of the manual feeder
A4R width: 210 mm, A6R width: 105 mm, A4 width: 297 mm
For micro adjustment after basic width registration, select MF-A4R,
MF-A6R, or MF-A4 from COP. COPIER>ADJUST>CST-ADJ.
1
<Operating procedure>
1) Place an A4R size document on the manual feed and align the size
guide with the A4R width.
2) Select (MF-A4R) in this service mode to reverse its display. Press
the OK key to register the numeric value after automatic adjustment.
3) Also about the A6R and A4 sizes, register the basic width by
following the steps of 1) and 2).