Canon iR2270 Series, Руководство по обслуживанию

Страница: 244 / 1008

Chapter 5
5-36
assembly.
F-5-63
When mounting it, be sure to connect the flexible
cable [1] before fitting the contact image sensor (CIS)
[2] to the machine.
F-5-64
5.4.4.5
After Replacement of
the CIS
0006-9764
iR2270 / iR2870 / iR3570 / iR4570 / iR3530
Be sure to enter the value indicated on the CIS label
attached to the contact image sensor (CIS) using the
following service mode item:
COPIER>ADJUST>CCD>MTF-MG
(main scanning direction MTR correction value)
F-5-65
Be sure also to update the value indicated on the
service label found behind the left cover of the reader
unit so that it is identical to the value indicated on the
CIS label.
Reference:
At time of shipment from the factory, no CIS label is
attached.
5.4.5 Copyboard Cover Open/Close
Sensor
5.4.5.1 Removing the Reader
Rear Cover
0007-3437
iR2270 / iR2870 / iR3570 / iR4570 / iR3530
1) Disconnect the ADF communications cable [1] (if
equipped with an ADF)
Light guide
Rod lens array
[1]
[2]
X X
M T F - M G