Canon iR2270 Series, Руководство по обслуживанию

Страница: 886 / 1008

Chapter 16
16-42
<CST-ADJ>
T-16-26
<FIXING>
LOOP-ENV Adjusting the registration loop amount at envelope feed from a
cassette
2
<Setting range> -128 to 127 (Default: 0)
COPIER > ADJUST > CST-ADJ
Sub-item Description Level
MF-A4R Entering the basic paper width of the manual feed tray (A4R)
1
<Setting range> 0 to 1024 (Default: 516)
If RAM on the DC controller circuit board has been cleared or the
board itself has been replaced, enter the value from the service label.
For replacing the paper with detection VR or registering a new value
for the firs time, this service mode shall be executed by
FUNCTION>CST.
MF-A6R Entering the basic paper width of the manual feed tray (A6R)
1
<Setting range> 0 to 1024 (Default: 175)
If RAM on the DC controller circuit board has been cleared or the
board itself has been replaced, enter the value from the service label.
For replacing the paper with detection VR or registering a new value
for the firs time, this service mode shall be executed by
FUNCTION>CST.
MF-A4 Entering the basic paper width of the manual feed tray (A4)
1
<Setting range> 0 to 1024 (Default: 791)
If RAM on the DC controller circuit board has been cleared or the
board itself has been replaced, enter the value from the service label.
For replacing the paper with detection VR or registering a new value
for the firs time, this service mode shall be executed by
FUNCTION>CST.
COPIER > ADJUST > FEED-ADJ
Sub-item Description Level