Canon iR2018i Скачать руководство пользователя страница 374

Страница: 374 / 444

Consumables

7-57

utin

e M

ten

anc

■

Toner Cartridge

If a message prompting you to replace the toner cartridge appears on the touch panel display, replace
the used toner cartridge with a new one.

Use only toner cartridges recommended for use on this machine.

WARNING

•

Never dispose toner cartridges in a fire or incinerator, as this may result in an explosion.

•

Do not store toner cartridges in places exposed to open flames, as this may cause the toner
to ignite and result in burns or a fire.

CAUTION

Keep toner cartridges and other consumables out of the reach of small children. If these
items are ingested, consult a physician immediately.

IMPORTANT

•

Store toner cartridges in a cool location, away from direct sunlight. (The recommended storage
conditions are: temperatures below 30

C, and humidity below 80%.)

•

Never store the toner cartridge in a vertical position.

■

Stamp Cartridge

The stamp cartridge is used to stamp originals. Use only the stamp cartridges recommended for use on
this machine.

Содержание iR2018i





























































































































































































































































































































































































































































Результаты поиска

Содержание iR2018i

Отзывы:

Canon iR2018i, Справочное руководство, Страница: 374 / 444

Результаты поиска

Содержание iR2018i

Отзывы: