Canon iR2018i, Справочное руководство, Страница: 324 / 444

Paper Drawers 7-7
7
Ro
utin
e M
a
in
ten
anc
e
IMPORTANT
•
Paper which has been rolled or curled must be straightened out prior to use.
•
Make sure that the height of the paper stack does not exceed the loading limit mark ( ) at the
back of the paper drawer and the corners are below the paper size guide clips.
•
Be sure to set the paper-size detecting lever correctly. If the lever is set to the wrong position,
paper jams or dirty prints may occur, or the inside of the machine may get dirty.
NOTE
•
Each paper drawer holds approximately 250 sheets of paper (80 g/m 2 ).
•
If there are instructions on the package of paper about which side of the paper to load, follow
those instructions.
•
When the paper is loaded into the paper drawer, the side facing up is the one printed on.
•
If problems occur, such as poor print quality or paper jams, try turning the paper stack over, and
reload it.
•
For more information on the print direction of preprinted paper (paper which has logos or
patterns already printed on it), see “Relationship between Original Orientation and Preprinted
Paper Output Chart,” on p. 9-9.
5
Gently push the paper drawer back into the machine until it clicks into
place in the closed position.