Canon iR2018i Скачать руководство пользователя страница 23 | Manualshive

Страница: 23 / 444

Canon iR2018i Скачать руководство пользователя страница 23

xxii

Please read these “Important Safety Instructions” thoroughly before operating the machine. As
these instructions are intended to prevent injury to the user or other persons or destruction of
property, always pay attention to these instructions. Also, since it may result in unexpected
accidents or injuries, do not perform any operation unless otherwise specified in the manual.
Improper operation or use of this machine could result in personal injury and/or damage
requiring extensive repair that may not be covered under your Limited Warranty.

Installation

WARNING

•

Do not install the machine near alcohol, paint thinner, or other flammable substances. If
flammable substances come into contact with electrical parts inside the machine, it may result in
a fire or electrical shock.

•

Do not place the following items on the machine. If these items come into contact with a
high-voltage area inside the machine, it may result in a fire or electrical shock.
If these items are dropped or spilled inside the machine, immediately turn OFF the main power
switch, and disconnect the power cord from the power outlet. Then, contact your local authorized
Canon dealer.

- Necklaces and other metal objects
- Cups, vases, flowerpots, and other containers filled with water or liquids

Important Safety Instructions

«
...
21
22
23
24
25
...
»

Содержание iR2018i





























































































































































































































































































































































































































































Отзывы:

Нет отзывов