Canon iR2018i Скачать руководство пользователя страница 28 | Manualshive

Страница: 28 / 444

Canon iR2018i Скачать руководство пользователя страница 28

xxvii

•

The laser beam can be harmful to human bodies. Since radiation emitted inside the product is
completely confined within protective housings and external covers, the laser beam cannot
escape from the machine during any phase of user operation. Read the following remarks and
instructions for safety.

•

If the laser beam escapes from the machine, exposure may cause serious damage to your eyes.

•

Never open covers other than those instructed in this manual.

•

Do not remove the caution labels attached to the laser scanner unit inside the machine and next
to the toner cartridge, behind the front cover.

•

Turn OFF the control panel power switch for safety when the machine will not be used for a long
period of time, such as overnight. Also, turn OFF the main power switch, and disconnect the
power cord for safety when the machine will not be used for an extended period of time, such as
during consecutive holidays.

«
...
26
27
28
29
30
...
»

Содержание iR2018i





























































































































































































































































































































































































































































Отзывы:

Нет отзывов