Canon iR1200 Series, Руководство по обслуживанию

Страница: 437 / 494

Chapter 15
15-29
Use it to set the length of time during which the absence of sound on the line, 2nd NSS signal, or CNG signal
transmitted by the other party is monitored after the answering phone acquires the telephone line when answering
machine mode is selected.
[No. 27]
Use it to change the detection evaluation time. (Command analysis is started when the V.21 low-speed command
preamble is detected continuously for a specific period of time.)
[No. 28]
Use it to set the length of time during which the Menu Select screen is indicated on the LCD.
[No. 56 through 61]
Use it to confirm the count type indicated on the Counter Check screen, which appears in response to a press on the
Counter key.
When '0' is selected, count type will not be indicated.
No.56: fix to total 1 (101) for the counter 1 reading.
No.57: use it to select a count type for the counter 2 reading.
No.58: use it to select a count type for the counter 3 reading.
No.59: use it to select a count type for the counter 4 reading.
No.60: use it to select a count type for the counter 5 reading.
No.61: use it to select a count type for the counter 6 reading.
If above selections have been made, the counters will be displayed in order of counter numbers.
<Soft Counter Specifications>
The soft counters are classified as follows according to input numbers:
101: total
102: not used
103: not used
104: not used
201: copy
202: not used
203: not used
204: not used
301: print (indicates sum of prints from PC and report prints)
302: not used
303: not used
304: not used
331: PDL (indicates prints from PC only)
332: not used
333: not used
334: not used
505: scan
506: not used
507: not used