Canon iR1200 Series, Руководство по обслуживанию

Страница: 441 / 494

Chapter 15
15-33
[bit 0]
Use it to specify whether or not to reduce the received image of an extra-long original if it can be printed in divisions
after reducing to the maximum reduction ratio (70%).
prohibit:
select it to divide and print on the next page (Direct).
For instance, if an extra-length original as long as 2.5 A4R original is received, it will be
divided into 3 A4R sheets for printing; the image will be in Direct.
do not prohibit:
select it to print the image by reducing it to fit a single page (in divided print mode).
For instance, if an extra-length original as long as 2.5 A4R originals is received, it will be reduced to 70% to print
on 2 A4R sheets.
T-15-30
[bit 0, 1]
Use bits 0 and 1 to select humidity sensor fixed mode; the combinations of modes and bit SW settings are as follows:
#7 PRINTER #1 SSSW-SW13 (humidity sensor fixed mode)
Bit Function 1 0 Factory
setting
0 humidity sensor fixed mode
selected 1 0 0
1 1 0 0
2 not used - - -
3 not used - - -
4 not used - - -
5 not used - - -
6 not used - - -
7 not used - - -