Canon iPF6100 - imagePROGRAF Color Inkjet Printer, Руководство по обслуживанию

Страница: 234 / 367

Chapter 4
4-62
- If the tube is full of ink, releasing the printhead lock lever with the ink supply valve open can cause the ink
to flow back to the ink supply unit, resulting in leakage of ink from the ink supply needle.
- If the ink supply valve is held open due to a problem such as a valve motor error(E02D06), remove the valve
motor unit(refer to DISASSEMBLY/REASSEMBLY > Points to Note on Disassembly andReassembly >
Ink Tank Unit) and close the ink supply valve.
4.3.18 Draining the Ink
0012-6416
There are two methods of removing the ink, amanual methtod and an automatic method.
There the ink is drained, the ink inside the ink passage totaling about72g(about 6g x 12colors) is drained as waste
ink.
To prevent ink leakage, be sure to drain the ink inside the ink passage before transporting the printer again.
1. Automatic ink drainage
To perform "automatic ink drainage", select "Main Menu" > "Maintenance" > "Move Printer".
Perform automatic ink drainage again if a power outage or other cause shuts off the power during the operation
for automatic ink drainage.
2. Manual Ink Drainage
Perform manual ink drainage when the printer cannot be powered due to a printer's electrcal part failure,
firmware error, or power supply problem.
Manual Ink Drainage Procedure
1) Open the top cover, and then remove the left and right circle covers, tank cover, right upper cover, operation
panel, mist filter, filter cover, filter, and right cover. Refer to DISASSEMBLY/REASSEMBLY > Pointe
toNote on Disassembly andReassembly > External Cover.
2) Move the carriage onto the platen. Refer to DISASSEMBLY/REASSEMBLY > Points to Note on
Disassembly and Reassembly > Opening the Cap/Move the Wiper Unit.