Other problems
Depression on the leading edge is left
Cause
Corrective Action
Keeping a roll in the printer for a long time without
printing on it may leave a depression on the leading
edge.
When printing quality is most important, we
recommend setting
TrimEdge Reload
to
On
or
Automatic
so that the paper edge is automatically
cut before printing.
Roller marks are left across the trailing edge of paper
Cause
Corrective Action
Following the instructions, press the
Load/Eject
button, remove the paper, and then press the
OK
button.
A document was removed after printing from
the Front Paper Feed Slot without pressing the
Load/Eject
button.
Wipe away any soiling on the rollers. (→P.640)
(→P.643)
The printer does not go on
Cause
Corrective Action
The printer is unplugged.
Plug the power cord into the outlet, and then turn on
the printer.
The specied voltage is not supplied.
Check the voltage of the outlet and breaker.
For information on the specied voltage, see
“Specications”. (→P.72)
Roll paper cannot be inserted into the Paper Feed Slot
Cause
Corrective Action
The roll paper is warped.
Straighten out curls and reload the roll.
The roll was pulled out by force when it had been
advanced before printing, and this action closed the
Paper Feed Slot .
Hold down the
Load/Eject
button for a while and
reload the roll.
Cannot Load Sheets
Cause
Corrective Action
The paper source selection is incorrect.
Press the
Feeder Selection
button to activate the
Cut Sheet lamp
.
684 Troubleshooting
Содержание iPF6100 - imagePROGRAF Color Inkjet Printer
