Canon ImageRunner C2550, Справочное руководство

Страница: 479 / 512

List of Error Messages 8-83
8
T
rou
b
lesh
o
o
ti
ng
# 849
Cause Device information could not be delivered because the client machine is
processing a job.
Remedy Try delivering device information again after the client machine finishes
processing the job.
# 850
Cause Device information could not be delivered because a screen relating to the
delivered device information is being displayed.
Remedy Try delivering the device information again after the screen is cleared from the
client machine. (See "Checking/Printing the Communication Log," on p. 6-60.)
# 851
Cause 1 There is insufficient memory remaining in the system.
Remedy Check the system's available memory, and delete any unnecessary documents
stored in inboxes. (See Chapter 2,"Introduction to the Mail Box Functions," in
the
Copying and Mail Box Guide .)
Cause 2 The machine's memory is full.
Remedy Erase unnecessary documents and documents with errors from memory to
increase the amount of available memory. (See Chapter 6, "Receiving
Documents," in the
Sending and Facsimile Guide , and Chapter 2, "Introduction
to the Mail Box Functions," in the Copying and Mail Box Guide .)
Cause 3 The document cannot be stored because there are more than 1,500 documents
in the specified inbox.
Remedy If there are a large number of documents, delete the unnecessary ones from
the specified inbox. (See Chapter 2,"Introduction to the Mail Box Functions," in
the
Copying and Mail Box Guide .)
# 852
Cause An error occurred because the main power switch was turned OFF while a job
was being processed.
Remedy Check to see if the main power switch is turned ON. Try processing the job
again, if necessary. (See "Main Power and Control Panel Power," on p. 1-14.)