manualshive.com logo in svg

Canon imageRUNNER ADVANCE C5500 Series, Руководство по обслуживанию, Страница: 665 / 1331

Поделиться
Скачать
Canon imageRUNNER ADVANCE C5500 Series Скачать руководство пользователя страница 665

10-0022

-

Patch detection light intensity abnormal change alarm

A. Operation / B. Cause /

C. Remedy

Movement: Patch control (not to execute Dmax, real-time multiple tone control and ATR control)
Cause: The average light intensity of P-wave after light intensity correction was out of the specified
range.
Measures:
1. Clean the window of the Patch Sensor, and execute light intensity correction. (Turn OFF and
then ON the main power and execute the correction at warm-up rotation.)
2. Check the ITB (soiling, etc.).
3. Check the operation of the Registration Shutter Solenoid (SL1).
4. Check the connector between the DC Controller PCB and the sensor.
5. Replace the Registration Patch Sensor Unit.
6. Replace the DC Controller PCB. (At this time, be sure to perform backup and restoration
according to the steps to be taken before/after replacing the DC Controller.)

10-0091

-

Toner memory detection alarm (Y)

A. Operation / B. Cause /

C. Remedy

Cause: Memory of toner (Y) could not be detected.
1. Remove and then install the Toner Bottle.
2. Check for any scar or soiling on the memory area of the Toner Bottle.
3. Check the connector between the Bottle New/Old Sensor (Y) (UN66) and the DC Controller
PCB.
4. Check for any soiling or damage on the Bottle New/Old Sensor (Y) (UN66).
5. Replace the Toner Bottle (Y).

10-0092

-

Toner memory detection alarm (M)

A. Operation / B. Cause /

C. Remedy

Cause: Memory of toner (M) could not be detected.
1. Remove and then install the Toner Bottle.
2. Check for any scar or soiling on the memory area of the Toner Bottle.
3. Check the connector between the Bottle New/Old Sensor (M) (UN67) and the DC Controller
PCB.
4. Check for any soiling or damage on the Bottle New/Old Sensor (M) (UN67).
5. Replace the Toner Bottle (M).

10-0093

-

Toner memory detection alarm (C)

A. Operation / B. Cause /

C. Remedy

Cause: Memory of toner (C) could not be detected.
1. Remove and then install the Toner Bottle.
2. Check for any scar or soiling on the memory area of the Toner Bottle.
3. Check the connector between the Bottle New/Old Sensor (C) (UN68) and the DC Controller
PCB.
4. Check for any soiling or damage on the Bottle New/Old Sensor (C) (UN68).
5. Replace the Toner Bottle (C).

10-0094

-

Toner memory detection alarm (Bk)

A. Operation / B. Cause /

C. Remedy

Cause: Memory of toner (Bk) could not be detected.
1. Remove and then install the Toner Bottle.
2. Check for any scar or soiling on the memory area of the Toner Bottle.
3. Check the connector between the Bottle New/Old Sensor (Bk) (UN69) and the DC Controller
PCB.
4. Check for any soiling or damage on the Bottle New/Old Sensor (Bk) (UN69).
5. Replace the Toner Bottle (Bk).

10-0100

-

Toner bottle replacement completion alarm

A. Operation / B. Cause /

C. Remedy

The replacement of the Toner Container was detected.

10-0401

-

Toner Bottle empty alarm (Y)

A. Operation / B. Cause /

C. Remedy

When the Toner Bottle empty was detected

10-0402

-

Toner Bottle empty alarm (M)

A. Operation / B. Cause /

C. Remedy

When the Toner Bottle empty was detected

7. Error/Jam/Alarm

651

Содержание imageRUNNER ADVANCE C5500 Series




















































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов