manualshive.com logo in svg

Canon imageRUNNER ADVANCE C5500 Series, Руководство по обслуживанию, Страница: 1142 / 1331

Поделиться
Скачать
Canon imageRUNNER ADVANCE C5500 Series Скачать руководство пользователя страница 1142

NOTE:

• Initialization of toner supply, initialization of the

Developing Unit, initialization of the drum, and color
displacement correction, etc. are automatically
performed while Setup Guide is running.

• When all initializations have been completed, Setup

Guide stops (approx.4 minutes).

When not executing Setup Guide, it can be canceled by
pressing [Cancel] on the Touch Panel Display. When
executing Setup Guide, follow the Setup Guide to specify
the items in the order shown below:

1. <Switch Language/Keyboard>

Select the displayed language and keyboard layout.

2. <Paper Settings>

1. Select the paper source for which you want to

specify the paper type, and press [Set].

2. Select the paper type, and press [OK].
3. If [Plain] is selected, the basis weight can be specify

from [Plain Paper Weight Set].

4. If a button corresponding to the paper that has been

set is not displayed, press [Detailed Settings] and
make a selection on the detailed settings screen.

NOTE:

• If the corresponding paper type is not displayed on

the simple settings screen, press [Detailed Settings]
and make a selection on the detailed settings screen.

• If the type of loaded paper is not displayed on the

detailed settings screen, you can register it.

3. <Authentication Login>

NOTE:

Pressing [Skip] proceeds to auto gradation adjustment
instead of the setting of system administrator privilege.

Press [Log in], and enter a password.

CAUTION:

• Do not change Administrator here.
• Enter the initial value "7654321" in the password

entry field.

4. <Use Optional Output Tray>

Set whether to use the optional output tray.

CAUTION:

Make sure the output tray that is set to On is attached
to the device, or the output tray will not function
correctly.

5. <Date/Time Settings>

Set the date and time.

CAUTION:

Perform the network settings according to the user's
request.

6. <Use IP Address>

Specify IPv4 and/or IPv6, and each IP address.

7. <DNS Server Address Settings>

Configure the DNS Server Address Settings, the DNS
Host/Domain Name Settings, and the DNS Dynamic
Update Settings.

8. <Proxy Settings>

Specify the Proxy Settings.

9. <Country/Region> (FAX-TYPE settings)

Select Country/Region.

10. <Register Unit Telephone Number>

Set the phone number, the name the machine will
appear as on the network, and the line type.

11. <Auto Adjust Gradation>

Select [Full Adjust].

12. <Output Report>

Select the Setting Value List , [Start Printing] > OK.

NOTE:

Be sure to keep the report which has been output.

13. <Setup Guide Done>

When Setup Guide is completed, the machine is
automatically restarted.

■ Informing the System Administrator
That Installation Is Complete

When the installation is completed, ask the system
administrator to change the password. Also ask the system
administrator to keep the changed password in a safeplace
to prevent leakage.

9. Installation

1128

Содержание imageRUNNER ADVANCE C5500 Series




















































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов