manualshive.com logo in svg

Canon imageRUNNER ADVANCE C5500 Series, Руководство по обслуживанию, Страница: 472 / 1331

Поделиться
Скачать
Canon imageRUNNER ADVANCE C5500 Series Скачать руководство пользователя страница 472

 S.M.A.R.T Check -----

     05: Reallcated Sectors Count:[000000000000]

     C5: Current Pending Sector Count:[000000000000]

     C6: Uncorrectable Sector Count:[000000000000]

 Read Performance Check -----

        [90.8MB/s]

CheckResult => [NORMAL]

Exec SN-100 HDD HEALTH CHECK => [OK]

===================================

Exec SCENARIO-1 Preocessing BoxMode => [OK]

The average transfer speed of a normal 

HDD displays [80-90MB/s].

If "Performance" is [20 MB/s] or less,

 recommend to replace the HDD.

If the result is NG, replace the HDD.

If the result is CAUTION, 

recommend the backup of user data.

Refer to <S.M.A.R.T Check>.

See below.

● HDD S.M.A.R.T Information

S.M.A.R.T Check

S.M.A.R.T Check

Description

Remedy

05: Reallocated Sectors Count:
[000000000000]

Number of alternative processed defec-
tive sectors

If a numeric value besides [0000000000000] is displayed,
backup is recommended to avoid losing customer data.

c5: Current Pending Sector
Count: [000000000000]

Number of pending sectors (sectors
that may have defective sectors)

If a numeric value apart from [0000000000000] is displayed,
backup is recommended to avoid losing customer data.

c6: Uncorrectable Sector
Count: [0000000000000]

Number of defective sectors (uncorrect-
able sectors) which do not allow alter-
native processing

If a numeric value apart from [0000000000000] is displayed,

• backup is recommended to avoid losing customer data.
• Replace the HDD

* Alarm 31-0008 may have occurred in the Host Machine.

NOTE:

Response when the HDD mirroring kit is installed in the Host Machine
Content displayed in the SMART information is the diagnosis result of the master HDD.
To check which HDD is the master HDD, turn the power OFF and then ON and check whether the green LED on the Mirroring
PCB is lit.
In conjunction with the HDD's access status, the HDD with the green LED (ChA or ChB) that performs high-speed blinking first
will be the master HDD. Conversely, the HDD with the green LED that does not light in this status will be the backup HDD.

 Limitations

• If there is a problem with the test name (SN-1, 2, 9, 13, 14), this diagnosis tool itself will not startup.
• When no PCBs are installed on the Main Controller PCB, the following judgment results are displayed.

Standard PCB: [NG]
Optional PCB: [OK]
However, [NO] is displayed in detailed error information for optional PCBs.

6. Troubleshooting

458

Содержание imageRUNNER ADVANCE C5500 Series




















































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов