manualshive.com logo in svg

Canon IMAGERUNNER 7086, Руководство по обслуживанию

Поделиться
Скачать
Canon IMAGERUNNER 7086 Скачать руководство пользователя страница 356

Chapter 12

12-5

Log detailed screen

F-12-3

Detailed information of individual communication test error is displayed.
Refer to the displayed message to "Error message list".
It shifts to "Log list screen" by the [OK] button pressing.
Maximum length of error information: 128 characters (not include NULL)

12.1.9 Sleep operation

0011-6839

When there is a method that should be transmitted while e-RDS is operating (ON), e-RDS wakes from the
state of sleep and begins transmitting.

12.1.10 Network Setting (Maintenance)

0011-6840

You should do the network setting of Device appropriately before the e-RDS setting.
A. Display the Additional Functions screen.

-  Press [Additional Functions (*)] key.
-  Input ID code.

B. Display the TCP/IP Settings screen.

-  Select (touch) [System Settings] > [Network Settings] > [TCP/IP Settings] on the Touch Panel
Display.

C. Setting of items related to IP address

-  Select (touch) [IP Address Settings] => IP Address Settings screen is displayed.
-  Set each items such as IP Address, Subnet Mask, Gateway Addresses, and DHCP, etc.
-  Return to the TCP/IP Settings screen by pushing the [OK] button after the setting ends.

D. DNS Settings

-  Select (touch) [DNS Settings] => DNS Settings screen is displayed.
-  Set necessary items.
-  Return to the TCP/IP Settings screen by pushing the [OK] button after the setting ends.

E. Proxy Settings

-  Select (touch) [Proxy Settings] (Press Down arrow button until [Proxy Settings] is displayed on the
TCP/IP Settings screen.) => Proxy Settings screen is displayed.
-  Set necessary items.
-  Return to the TCP/IP Settings screen by pushing the [OK] button after the setting ends.

F. Display the normal screen.

-  Press [Additional Functions (*)] key pressing or press [Done] button to a necessary frequency.

Содержание IMAGERUNNER 7086








































































































































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды