Canon IMAGERUNNER 7086, Руководство по обслуживанию

Страница: 228 / 615

Chapter 7
7-51
7.10.19.2 Removing the Wire Cleaner for
the Primary Charging Assembly
0010-8935
1) Remove the primary charging assembly.
2) Move the clip base [1] fully to the rear, and
remove the screw [2]; then, remove the support
plate [4] of the wire clean motor shaft [3], and
detach the clip base [1] from the cut-off [6] of
the shielding plate [5] together with the wire
cleaner motor shaft [3].
F-7-126
3) Pick the wire cleaner with small pliers, and free
the hook with your fingers.
F-7-127
7.10.19.3 Removing the Wire Cleaner of
the Transfer Separation Charging
Assembly
0010-8940
1) Remove the transfer/separation charging
assembly.
2) Move the felt holder [1] to the front as far as it
moves.
F-7-128
3) Remove the motor cover [1] together with the
motor.
F-7-129
4) Remove the E-ring [1]; then, pull the screw [2]
to the front, and remove it upward.
F-7-130
5) From the cut-off of the shielding plate [1], free
the felt holder [2].
6) Pick the wire cleaner with a pair of fine-tipped
pliers, and free the hook with your finger.
F-7-131
[3]
[2] [4] [1]
[5]
[6]
[6]
[1]
[1]
[1]
[2]
[1]
[5]
Cut off
Cut off