Canon imageRUNNER 3300, Руководство по эксплуатации функций, Страница: 71 / 156

Scanning Separately-set Originals as One Document (Job Build) 2-45
Scanning Or
iginals into a Mail Bo
x
2
Scanning Separately-set Originals as One
Document
(Job Build)
With this function you can scan originals that are too numerous to scan at once, by dividing
them into multiple batches. You can use both the feeder and the platen glass for scanning.
The originals are stored as one document after all the batches have been scanned.
IMPORTANT
•
You cannot change the scan settings while scanning originals in the Job Build mode. You need to
set the necessary scan settings beforehand according to the type of original and desired Finisher
mode.
•
You can change or specify the following before scanning the next originals, i.e., between jobs: the
number of copies, image quality, exposure, and 2-sided mode.
•
If you place the originals in the feeder, remove the originals sequentially from the original output
area when scanning is completed.
NOTE
•
When you place different-size originals in the feeder, set the “Different size Originals” mode.
•
To scan one-sided and two-sided originals as two-sided, set the “Two-sided Original” mode
beforehand, if the first batch of original is two-sided. To scan the next original(s), set or cancel the
Two-sided Original mode according to the type of original.
•
It also is useful to store originals in a box and print them with the Merge Documents mode when
you cannot prepare originals at once, or when you want to select different settings for each
original. (See ‘Printing Multiple Documents as One Document (Merge Documents),’ on p. 3-33.)
1
Select the desired mail box number to display the Document
Selection screen, and press “Scan.”
When you select a mail box set with a password, enter the password after selecting the
mail box, and press “OK.”
The Scan screen is displayed.
2
Place your first original, and press “Special Features.”
E201box_INDEX.book Page 45 Thursday, May 24, 2001 12:04 AM