Canon imageRUNNER 3300, Руководство по эксплуатации функций, Страница: 58 / 156

2
Erasing Shadows and Frame Lines (Frame Erase) 2-32
Scanning Or
iginals into a Mail Bo
x
5
Set the desired original frame erase width using “–” or “+,” and
press “OK”
→
press “Done.”
When entering values in millimeters, you can use
-
(numeric keys) and (Clear).
Even when you enter the values with
-
(numeric keys), you can change the values
with “–” or “+.”
The value set here is specified uniformly around the original. To set frame erase width
values for the top, bottom, left, and right sides of the original independently, press “Adjust
Each Dim.”
If you press “Adjust Each Dim.,” select each side of the original, and enter the value using
“–” or “+”
→ press “OK” → press “Done.”
The specified mode is set and the display returns to the Scan screen.
If you enter a value outside the setting range, a message prompting you to enter the
appropriate value appears in the screen.
NOTE
•
If you want to enter values in millimeters, press “mm.”
•
The default setting is 1/8" (4mm).
E201box_INDEX.book Page 32 Thursday, May 24, 2001 12:04 AM