Canon imageRUNNER 2545i, Справочное руководство

Страница: 187 / 264

Self-diagnostic Display 6-20
T
ro
ub
les
ho
ot
ing
6
# 0752
Cause 1 The SMTP server name and e-mail address are incorrect.
Remedy Check that SMTP Server and E-mail Address in E-mail/I-Fax are set correctly.
(See Chapter 3, “Setting up the Machine for Your Network Environment,” in the
System Settings Guide .)
Cause 2 The domain name is incorrect.
Remedy Check that Domain Name in DNS Host Name/Domain Name Settings is set
correctly. (See Chapter 3, “Setting up the Machine for Your Network
Environment,” in the
System Settings Guide .)
Cause 3 The SMTP server is not functioning.
Remedy Check that the SMTP server is operating properly.
Cause 4 The network is down.
Remedy Check the network status.
# 0753
Cause A TCP/IP error occurred while sending an e-mail. (Socket, Select error, etc.)
Remedy Check that the network cable is properly connected between the machine and
your computer. If the machine still does not operate normally, turn the main
power OFF and then back ON.
# 0755
Cause 1 Jobs cannot be sent because TCP/IP is not functioning correctly.
Remedy Check that TCP/IP Settings in Network Settings is set correctly. (See Chapter 2,
“Connecting the Machine to a TCP/IP Network,” in the
System Settings Guide .)
Cause 2 The IP address is not set.
Remedy Check that TCP/IP Settings in Network Settings. (See Chapter 2, “Connecting
the Machine to a TCP/IP Network,” in the
System Settings Guide .)
Cause 3 When the machine was turned ON, an IP address was not assigned to the
machine by the DHCP, RARP, or BOOTP server.
Remedy After the machine is turned ON, communication with a network will not start until
the time specified in Startup Time Settings in Network Settings elapses. (See
Chapter 7, “Other System Settings,” in the
System Settings Guide .) Wait a few
moments, and then try sending again.