manualshive.com logo in svg

Canon imageRunner 2220i, Руководство пользователя

Поделиться
Скачать
Canon imageRunner 2220i Скачать руководство пользователя страница 10

 

How to Use This Manual

 

ix

 

Preface

 

Thank you for purchasing the Canon imageRUNNER 3320i/2220i. Please read this manual 
thoroughly before operating the machine in order to familiarize yourself with its capabilities, 
and to make the most of its many functions. After reading this manual, store it in a safe place 
for future reference.

 

How to Use This Manual

 

Symbols Used in This Manual

 

The following symbols are used in this manual to explain procedures, restrictions, 
handling precautions, and instructions that should be observed for safety.

 

Keys Used in This Manual

 

The following symbols and key names used in this manual are expressed in the 
following way:

 

•

 

Control Panel Keys ............. <Key icon> + (Key Name)
Example: (Start)
                

(Stop)

 

•

 

Touch Panel Display Keys .. [Key Name]
Example: [Cancel]
                [Done]

 

 WARNING

Indicates a warning concerning operations that may 
lead to death or injury to persons if not performed 
correctly. In order to use the machine safely, always 
pay attention to these warnings.

 CAUTION

Indicates a caution concerning operations that may 
lead to injury to persons, or damage to property if not 
performed correctly. In order to use the machine 
safely, always pay attention to these cautions.

 

 IMPORTANT

 

Indicates operational requirements and restrictions. Be sure to 
read these items carefully in order to operate the machine 
correctly, and to avoid damage to the machine.

 

 NOTE

 

Indicates a clarification of an operation, or contains additional 
explanations for a procedure. Reading these notes is highly 
recommended.

Содержание imageRunner 2220i



















































































































































































































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды