Canon imagePROGRAF W7200, Руководство по установке

Страница: 35 / 126

4 Installing the Printhead
23
1-23
Important
6
Raise the printhead lock cover completely to open it.
7
Hold the new printhead by the grips (a) on both sides of the printhead
and remove it from its case. Remove the orange protective cap 1 (b),
then while pressing in on the grips (d) on both sides as shown in the
illustration, pull down to remove protective cap 2 (c).
z
The nozzles under protective cap 2 (c) are covered with ink for their protection.
Handle the printhead carefully to avoid touching these nozzles or dropping the
printhead and causing ink stains.
z
When handling the printhead, always hold it by the grips (a) on the left and right
sides.
z To prevent damaging the printhead or poor printing results , never touch the
exposed nozzles (e) or electrical contacts (f) on the printhead.
a
b
c
d
d
e
f