Media take-up unit ready.
Media take-up unit ready.
Cause
Corrective Action
The
Take-up Reel
setting in the printer
Set./Adj. Menu
was changed from
Enable
to
Disable
, but a print job was
received before the roll was removed.
Press
▲
or
▼
to select
Stop Printing
, and then press the
OK
button to stop
printing.
The mode switches from take-up mode to regular mode after you change the
Take-up Reel
setting in the
Set./Adj. Menu
from
Enable
to
Disable
and lift
the Release Lever to remove a roll, or after you execute
Paper Cutting
.
Press
▲
or
▼
to select
, and then press the
OK
button to resume print-
ing.
Turn on the media take-up unit.
Turn on the media take-up unit.
Cause
Corrective Action
The
Take-up Reel
setting in the control panel menu was changed to
Enable
while the power to
the
Take-up Reel
was off and the
Roll Media lamp
on the control panel was lit.
Turn the Media Take-up Unit on.
The
Take-up Reel
setting in the con-
trol panel menu changes to
Disable
.
Borderless printng not possible.
Borderless printng not possible.
Cause
Corrective Action
The print job received specifies a
type or width of paper that is not
compatible with borderless printing.
Follow these steps to change the settings of the print job to enable borderless printing.
1.
Press
▲
or
▼
to select
Stop Printing
, and then press the
OK
button.
2.
Make sure the correct printer driver for the printer is selected and try printing again.
For information on types of paper compatible with borderless printing, refer to the Paper Refer-
ence Guide.
(See Paper Reference Guide.)
Select
None
when you have set
Detect Mismatch
on the control panel to
Warning
.
However, note that this error may cause paper jams and affect the printing quality.
Press
▲
or
▼
to select
Print With Border
, and then press the
OK
button to continue printing. The
document will be printed with a border.
The loaded paper is a size not com-
patible with borderless printing.
Press
▲
or
▼
to select
Stop Printing
, and then press the
OK
button.
Replace the paper with paper compatible for borderless printing as follows.
1.
Press
▲
or
▼
to select
Change Paper
, and then press the
OK
button.
(See "Removing the Roll from the Printer.")
→P.15
(See "Removing the Roll Holder from Rolls.")
→User's Guide
2.
Replace the paper with paper compatible for borderless printing.
(See "Attaching the Roll Holder to Rolls.")
→P.9
(See "Loading Rolls in the Printer.")
→P.11
The printer now starts printing the print job.
For information on types of paper compatible with borderless printing, refer to the Paper Refer-
ence Guide.
(See Paper Reference Guide.)
Press
▲
or
▼
to select
Print With Border
, and then press the
OK
button to continue printing. The
document will be printed with a border.
Paper position not suitable for borderless printing.
Paper position not suitable for borderless printing.
Cause
Corrective Action
Because paper expands or contracts de-
pending on the environment of use, it may
become narrower or wider than the suppor-
ted width for borderless printing.
Press
▲
or
▼
to select
Stop Printing
, and then press the
OK
button.
Use each type of paper only where the recommended environmental conditions are met. For
details on environmental conditions for various paper, see the Paper Reference Guide.
(See Paper Reference Guide.)
Select
None
when you have set
Detect Mismatch
in the Control Panel menu to
Warning
.
However, note that this error may affect the printing quality.
iPF9400S
Media take-up unit ready.
Basic Guide
Error Message
Messages regarding paper
137
