Cause
Corrective Action
Note that this is displayed when all of the following are satisfied.
•
If "
Set Exec. Guide
" is
On
in the Control Panel menu.
•
If the printer is loaded with a type of paper on which color calibration cannot be executed.
(See "Color Calibration Using the Printer
Sensor.")
→User's Guide
Set "
Set Exec. Guide
" to
Off
on the Con-
trol Panel menu.
(See "Menu Structure.")
→P.62
Please commn calibrt using above paper.
Please commn calibrt using above paper.
Cause
Corrective Action
It is now recommended that you execute Common calibration.
Note that this is displayed when "
Set Exec. Guide
" in the Control Panel menu is set to
On
and any of the
following is true.
•
If the printer is loaded with a type of paper on which color calibration cannot be executed and the pre-
defined conditions since executing the Common calibration the last time have been reached.
•
Although a media type that color calibration can be executed on is loaded in the printer, there is no
record or performing color calibration on that media, and the designated criteria from executing Com-
mon calibration the last time have been reached.
Execute Common calibration.
(See "Color Calibration Using
the Printer Sensor.")
→User's Guide
Set "
Set Exec. Guide
" to
Off
on the Control Panel menu.
(See "Menu Structure.")
→P.62
Please calibrate using above paper.
Please calibrate using above paper.
Cause
Corrective Action
It is now recommended that you execute Unique calibration.
Note that this is displayed when "
Set Exec. Guide
" in the Control Panel menu is set to
On
and any of the
following is true.
•
If the printer is loaded with a type of paper on which color calibration can be executed, but there is no
record of having executed color calibration on that paper or a record of having executed Common cali-
bration other any other type of paper.
•
If the printer is loaded with a type of paper on which color calibration can be executed, there is a record
of having executed color calibration on that paper, and the predefined conditions since executing the
color calibration the last time have been reached.
Execute Unique calibration.
(See "Color Calibration Us-
ing the Printer Sensor.")
→User's Guide
Set "
Set Exec. Guide
" to
Off
on the Control Panel
menu.
(See "Menu Structure.")
→P.62
Borderless printng not possible. Paper stretched or shrank.
Borderless printng not possible. Paper stretched or shrank.
Cause
Corrective Action
The loaded roll has expanded or contracted due to environmental condi-
tions, making it wider or narrower than the supported width for borderless
printing.
Press the
OK
button to stop printing.
Use each type of paper only where the recommended envi-
ronmental conditions are met. For details on environmental
conditions for various paper, see the Paper Reference
Guide.
(See Paper Reference Guide.)
Before borderless printing, move the blue platen switch.
Before borderless printing, move the blue platen switch.
Cause
Corrective Action
The blue Switch on the platen was set to the side opposite ●
when a borderless print job was received.
Before borderless printing, set the blue Switch on the platen to the ● side.
(See "Setting the Blue Switch on the Platen.")
→P.115
Blue platen switch is dirty.
Blue platen switch is dirty.
Cause
Corrective Action
The blue Switch on the platen is dirty.
Open the Top Cover and clean the blue Switch on the platen.
(See "Cleaning Inside the Top Cover.")
→P.53
Please commn calibrt using above paper.
iPF9400S
Basic Guide
Error Message
Messages regarding printing or adjustment
142