Canon imagePROGRAF iPF750 MFP M40, Руководство пользователя

Страница: 829 / 878

" Replace roll with 10 in. wide or larger roll. "
Cause Corrective Action
The loaded paper is too small. Replace the roll with a roll 10 inches in width or larger as follows.
1.
Press ▲ or ▼ to select Change Paper , and then press the OK button.
(See " Removing the Roll from the Printer .")
→P.585
(See " Removing the Roll Holder from Rolls .")
→P.589
2.
Replace the roll with a roll 10 inches wide or larger.
(See " Attaching the Roll Holder to Rolls .")
→P.575
(See " Loading Rolls in the Printer .")
→P.579
The printer will resume printing.
Press ▲ or ▼ to select Stop Printing , and then press the OK button.
" Remove paper and check pap. size "
Cause Corrective Action
A sheet has come out of the printer during print-
ing. 1. Press the Release Lever back and remove the paper.
2. Reload the sheet, aligning it with the guide on the right.
3. Pull the Release Lever forward.
4. If " Not finished printing. Finish printing remaining jobs? " is
shown on the Display Screen, press the OK button.
Printing will resume, starting from the page on which the error
occurred.
(See " Loading Sheets in the Printer .")
→P.602
PaprWidth Mismatch
Cause Corrective Action
When Detect Mismatch in the Control Panel menu
is set to Pause or Warning , the width of the loa-
ded roll does not match the width specified in Fit
Roll Paper Width in the printer driver.
Press ▲ or ▼ to select Print , and then press the OK button to
resume printing.
However, note that this error may cause paper jams and affect
the printing quality.
Press ▲ or ▼ to select Stop Printing , and then press the OK
button.
Follow these steps to replace the roll to match the width speci-
fied in the printer driver.
1.
Press ▲ or ▼ to select Change Paper , and then press the
OK button.
(See " Removing the Roll from the Printer .")
→P.585
(See " Removing the Roll Holder from Rolls .")
→P.589
2.
Replace the paper with paper compatible for borderless print-
ing.
(See " Attaching the Roll Holder to Rolls .")
→P.575
(See " Loading Rolls in the Printer .")
→P.579
The printer now starts printing the print job.
Error Message > Messages regarding paper >
iPF750 PaprWidth Mismatch
12
813