7
Available printers are listed in the
Search Results
window.
Select a printer from the list on either their
IPv4 Devices
or
IPv6
Devices
tabs and click
Next
.
The printer driver settings take effect after
the computer restarts. This completes
printer driver installation.
An
iPFxxxx Support
desktop icon
is created after installation. (iPFxxxx
represents the printer model.)
In the
Finish
window, select
Restart my
computer now
and click
Restart
.
After reviewing the installation results in
the
Complete Installation
window, click
Next
.
In the
Method of Configuring IP Addresses
window, enter the IP
address in
Configure manually
, under
Method of Configuring
IP Addresses
. Click
Install
to start the installation process. Also
enter your preferred name for the printer in
Device Name
and the
installation location in
Printer Location
under
Information About
Printer to Configure
, as desired.
The installation process begins.
Next, follow steps 12-16 on pages
5-6 to install the User Manual.
MEMO
• The
IPv6 Devices
tab is displayed in Windows 7, Windows Vista, and
Windows Server 2008.
• If the printer you want to use is not displayed in the list on the
IPv6
Devices
tab, connect via IPv4 instead.
• If the printer you want to use is not displayed in the list of printers on
the
IPv4 Devices
tab, refer to "When the printer cannot be found on the
network" on page 7 to setup and configure an IP address for the printer.
• If you use a DHCP server for automatic assignment of the printer's IP
address, printing may no longer be possible after the printer is turned off
and on. This is because a different IP address has been assigned. When
using DHCP server functions, consult your network administrator and
configure the settings in one of the following ways:
• Configure the setting for dynamic DNS updating
In the printer menu, either set
DNS Dync update
to
On
, or activate the
setting
Enable DNS Dynamic Update
in RemoteUI.
(
→
"Menu Settings", User Manual)
(
→
"Configuring the Printer's TCP/IP Network Settings", User Manual)
• Configure the setting for assignment of the same IP address each time
the printer starts up
If your printer cannot be found when connecting to
the network for the first time, setup an IP address
for the printer and then configure it on the printer.
When ink fills the system for the first time, after
printhead adjustment is finished, specify the IP
address on the printer's control panel.
On the tab selection screen of the control
panel, press the
▲
and
▲
keys to select
(settings/adj. tab) and press
OK
.
Use the
▲
and
▼
keys to select
Interface
Setup
and press
OK
.
Use the
▲
and
▼
keys to select
TCP/IP
and press
OK
.
Enter the IP address. Navigate through
the following menus using the
▲
and
▼
keys on the control panel.
1. Select
IPv4
and press
OK
.
2. Select
IPv4 Settings
and press
OK
.
3. Select
IP Address
and press
OK
.
4. Enter the IP address.
Press
Menu
.
Press
OK
on the registration confirmation
message that appears.
The IP address is set on the printer.
Next, restart installation of the printer
driver.
In the
Search Results
window, select
Specify the IP address of available
printers in the network
and click
Next
.
The
IP Address Specification
window
appears. Follow steps 8-11 on page 9 to
finish installing the printer driver.
When the printer cannot be found on the network
• When ink fills the system for the first time,
do not operate the printer until printhead
adjustment is finished.
MEMO
How to enter IP addresses
1. Press the
▲
and
▲
keys to select a
field for inputting values.
2. Use the
▲
and
▼
keys to input values.
• Pressing
▲
increases the value by
one.
• Pressing
▼
decreases the value by
one.
• Holding down either the
▲
or
▼
keys
continually increases or decreases
the value.
3. Press
OK
once you have finished.
No Paper Loaded
OK:Setting/Adj. Menu
Remaining Amount
㪈㪇㪇㩼
Maint. cart.
4
1
2
3
5
7
6
9
12
11
13
10