Canon imagePRESS C1+, Справочное руководство, Страница: 416 / 622

Registering/Editing Custom Paper Types 6-132
6
Syste
m
Man
age
r Set
ti
ngs
5
Select the paper source
➞
press [Start Print].
The test print paper is printed.
IMPORTANT
•
Only A3 or 11" x 17" paper can be used for the test prints. Make sure that a sufficient supply of
paper is loaded into the machine before starting this procedure.
•
If you perform test print using a paper smaller than A3 or 11" x 17", the entire image cannot be
printed on the paper. Nevertheless, you can read the register mark, because the tail edge you do
not have to check is lacking.
6
Check the location of the lead edge image on the front side of the test
print.
In the above example, the centre line of the register mark is outside the lead edge of the test
print (centre line of the register mark is NOT printed). Follow step 7 and 8 to adjust the lead
edge of the image on the front side of the test print.