Canon imageFORMULA DR-M140, Руководство по обслуживанию

Страница: 94 / 126

CHAPTER 5 TROUBLESHOOTING
2. Manual Shading E. Firm Load
This mode is used to change the color of
the image depending on the user conditions
even if regular automatic shading adjustment
and light adjustment using the service tool
are performed. You should not normally use
this.
There are two methods for updating the
firmware: One is to select and execute
pre-registered firmware, and the other is to
select and execute firmware saved on the
computer. The methods using
pre-registration makes it possible to store all
of the firmware within the same folder and
attach comments to firmware, and is easy to
manage.
Operation Procedure
1) Select [Manual Shading] to display the
setting screen. The initial values are all
“0”.
Figure 5-238 Figure 5-239
2) Set the adjustment value by moving the
slide bar. The set values are displayed.
The adjustable settings are gray, red,
green, and blue for each of the front and
back sides.
Note: For details on firmware updates, refer
also to the separately issued service
information.
3) After setting, select [Set].
Select [Initial Values] to return to [0].
Select [Cancel] to return to the values
before changing.
4) Actually scan a document and check the
image.
5-24
COPYRIGHT © CANON ELECTRONICS INC. 2011 CANON DR-M140 FIRST EDITION