Canon imageCLASS MP700, Краткое руководство пользователя

Страница: 62 / 96

10-4
Troubleshooting Chapter 10
4. Nothing is printed on the printout.
Print the nozzle check pattern ( User’s Guide ).
If the nozzle check pattern does not print properly, see User’s Guide .
If the nozzle check pattern does print properly, see the items marked with in Problems printing from
your computer , p. 10-2.
NOTE
• Once printed, received faxes are automatically deleted from the machine’s memory. Accordingly make
sure the printhead is cleaned periodically ( User’s Guide ) to avoid clogging and potential loss of data.
5. In manual receive mode, did you pick up the handset to receive a fax and before replacing the
handset, did you press [Start] or dial the remote receiving ID number?
If you replace the handset without doing either of these things, the call will disconnect.
6. Which receive mode is displayed on the bottom left of the LCD? Have you followed the
procedure for that receive mode correctly?
<FAX ONLY MODE> : The machine automatically receives faxes without ringing. You cannot manually
answer calls.
<NET SWITCH>* : If you have subscribed to the Telstra FaxStream™ Duet service (Australia) or the
Telecom FaxAbility service (New Zealand), allows you to have one telephone line with two numbers:
one for fax and one for telephone.
<MANUAL MODE> : The machine rings for both voice and fax calls. If you hear the machine ring, pick
up the handset and either press [Start] or dial the remote receiving ID to receive a fax.
<ANS.MACHINE MODE> : Fax calls are received automatically and voice calls are received by the
answering machine connected to the machine. There are no procedures to follow for receiving faxes.
The answering machine should be connected.
<FAX/TEL AUTO SW> : Fax calls are received automatically and the telephone rings for voice calls. There
are no procedures to follow for receiving faxes. Ringing indicates a voice call so pick up the handset.
7. Are there documents in the machine’s memory?
The memory may be full. Either print or delete documents ( User’s Guide ) to free up memory. Then
ask the sender to resend the fax.
8. Was there an error during reception?
Check the LCD for an error message ( User’s Guide ).
Print the ACTIVITY REPORT and check for an error ( User’s Guide ).
9. Is there a telephone line connected?
Check that the telephone line is correctly connected ( Set-Up Sheet ).
Cannot receive faxes automatically.
1. Is <FaxOnly>, <NET SW.>*, <AnsMode>, or <FaxTel> receive mode displayed on the bottom left
of the LCD?
If <Manual> is displayed, you cannot receive faxes unless you pick up the handset and either press [Start]
or dial the remote receiving ID.
If you want to receive faxes automatically which means not having to do anything when you are sent a fax,
set the receive mode to <FAX ONLY MODE>, <NET SWITCH>*, <ANS.MACHINE MODE>, or <FAX/TEL AUTO
SW> (
p. 7-7).
If set to <ANS.MACHINE MODE>, connect an answering machine to the machine ( Set-Up Sheet ) and
check that a message plays when the answering machine answers.
* This setting is only available in Australia and New Zealand.
P
2 7 / 1 2 2 0 0 3 S A T 1 5 : 0 0
F a x O n l y S T A N D A R D
Receive mode