Canon imageCLASS LBP121dn Скачать руководство пользователя страница 340

Страница: 340 / 388

Check the Certificate Information of the Authentication Server, and Register a Supported CA

Certificate.

Setting IEEE 802.1X(P. 155)

Registering a Key and Certificate or CA Certificate Obtained from an Issuing Authority(P. 163)

Incorrect number of characters/invalid characters entered.

The network key of the wireless LAN router (access point) is not configured correctly on the machine.

Reset the Network Key.

Check the network key of the wireless LAN router, and configure the settings correctly on the machine.

Connecting to a Wireless LAN(P. 38)

Low Cartridge Level

It is nearing the time to replace the toner cartridge.

Prepare New Toner Cartridge, and Replace the Old Ones, as Needed.

When printing large printing jobs, it is recommended to replace the toner cartridge. Replacing the Toner

Cartridge(P. 257)

To Continue Printing, Press [Continue Printing].

●

You can manually specify when this message appears (when toner is low). [Displ. Timing for Cartridge
Prep. Notif.](P. 199)

Mem. Full (Skip Error)

The memory is full with data that has not been printed due to an error.

Cancel Printing of the Data with an Error, or Press [Skip Error] on the [Status Monitor] Screen.

Canceling Printing with the Operation Panel(P. 122)

Viewing the Print Job Status and Log(P. 123)

Memory is full.

[Memory is full.] Is Displayed on the Operation Panel, and the Operation Cannot Be Performed.

Printing cannot be performed due to insufficient available memory. If there is data waiting to be printed, wait until the

processing is completed.

Reduce the File Size or Divide the File.

Optimize the file to make it smaller, or divide the file and then print it.

No Paper

There is no paper loaded, or the paper loaded cannot be used to print reports or lists.

Load the Paper.

Load the paper for printing reports, lists, and set the paper size and type. Loading Paper(P. 87)

No reply from the destination.

The Ethernet cable may not be connected or there may be a problem with the switch.

Troubleshooting

333

Содержание imageCLASS LBP121dn





































































































































































































































































































































































































Результаты поиска

Содержание imageCLASS LBP121dn

Отзывы:

Похожие инструкции для imageCLASS LBP121dn

Бренды по названию

Популярные бренды

Canon imageCLASS LBP121dn, Руководство пользователя

Результаты поиска

Содержание imageCLASS LBP121dn

Отзывы:

Похожие инструкции для imageCLASS LBP121dn

Бренды по названию

Популярные бренды