Canon imageCLASS D480, Основное руководство по эксплуатации

Страница: 183 / 246

10-12
M
aint
enanc
e
Replacing the Toner Cartridge
12 12
Lower the scanning platform.
Be careful not to get your fi ngers caught.
If you cannot close the toner cover, do not force
it to close. Open the cover and make sure the
toner cartridge is properly set in the machine. –
–
Replacing the Toner Cartridge with Replacing the Toner Cartridge with
a New One a New One
When the message <OUT OF TONER /CHANGE
TONER> appears, replace the toner cartridge with a
new one.
When toner empty error occurs while receiving fax,
printing fax is interrupted and the received data will
be stored in the memory. If you set <CONT.
PRINTING> to <ON>, you can keep printing fax
documents or reports without replacing the toner
cartridge. (See “FAX SETTINGS,” on p. 12-6.)
Do not touch the rollers and parts which have labels “CAUTION!
Hot surface avoid contact” on. They become very hot during
use.
When <CONT. PRINTING> is set to <ON>, the printed
documents may be light or blurred because of lack of toner.
The data is erased when the documents are printed out, so
you can not print the same documents again. (See “FAX
SETTINGS,” on p. 12-6.)
If the toner gauge indicates that the toner is empty, replace
the toner cartridge. (See “Checking the Toner Level,” on p. 1-
11.)
1
Hold the front side of the operation panel
with your hands.
2
Lift the scanning platform (A) until it is
locked. (You will hear an audible “click.”)
–
–
3
4
5