Canon ImageCLASS 2300, Справочное руководство

Страница: 56 / 197

Making Prints Using the Stack Bypass 2-13
Basic Oper
ations
2
Making Prints Using the Stack Bypass
If you are making prints on transparencies or non-standard size paper stock, load
the paper stock into the stack bypass.
■
Standard Size
You can select standard inch paper, or A or B series paper.
■
Free Size
You can load non-standard size paper (4" x 5 3/4" to 11 5/8" x 17" (100 mm x 148 mm to
297 mm x 432 mm)).
■
Envelope
The following envelopes can be loaded into the stack bypass: COM10, Monarch, and
DL.
IMPORTANT
Note the following points when using the stack bypass:
- Paper quantity: 1 to approximately 100 sheets (stack approximately 3/8" (10 mm) high)
- Paper size: 4" x 5 3/4" to 11 5/8" x 17" (100 mm x 148 mm to 297 mm x 432 mm)
- Paper weight: 16 to 32 lb bond (60 to 128g/m
2
)
- Paper which has been rolled or curled must be straightened out prior to use, to allow
the paper to feed smoothly through the stack bypass (allowable curl amount: less than
10 mm for normal paper, less than 5 mm for heavy paper.) There are some types of
paper stock that may meet the above specifications, but cannot be fed into the stack
bypass.
Do not load different size/type paper at the same time.
It is recommended not to use the back side of preprinted paper.
If you are using label sheets, load them one by one on the stack bypass.
LTR transparencies must be placed vertically into the stack bypass. Placing this paper
horizontally may cause blurred images.
If you are printing on envelopes, empty the output tray when at most 10 printed
envelopes accumulate in the tray.
For details about paper sizes when using the stack bypass, see "Standard Paper for the
Stack Bypass," on p. 3-16.
NOTE
For high quality printouts, use paper recommended by Canon.