7
8
Pr
ef
ac
e
Cop
ying
Fu
n
ct
io
n
Fa
cs
im
ile
Fu
nc
tion
Sendi
n
g
Fu
n
ct
io
n
M
ail Bo
x
Fu
n
ct
io
n
A
d
dit
ional
Fu
n
ct
io
n
s
O
th
er
Useful
Fe
atures
Copying Function
Making a Copy
Making a Copy
The following is an explanation of the basic procedure for copying a document. For more detailed procedures, see the
references to other guides.
If you have placed your originals on the platen glass,
close the feeder after placing your originals.
If necessary, set copy modes on the Regular Copy
Basic Features screen.
Place your originals.
For more information on the copy modes you can
set on the Regular Copy Basic Features screen,
see p. 21 and p. 22.
If you make a mistake when entering values, press
(Clear)
enter the correct values.
Enter the desired number of copies (1 to 9,999)
with the numeric keys.
The number of copies you specify is displayed on
the right side of the Regular Copy Basic Features
screen.
When copying is complete, remove your originals.
If the following screen is displayed, follow the
instructions on the screen and press
(Start) once
for each original. When scanning of the originals is
complete, press [Done].
Press
(Start).
4
5
6
7
8
9
0
If the following screen is displayed, enter
the [Dept. ID] and [Password]
press
(Log In/Out) on the touch panel.
Press [Copy] to switch to the Copy function.
If Department ID Management or the SDL or SSO
login service is set, it is necessary to enter an ID and
password. (If an optional card reader is attached,
insert a control card.)
For more information, see Chapter 2, “Basic
Operations,” in the Reference Guide.
For more information on the copy modes you can
set on the Special Features screen, see p. 21 and
p. 22.
To set the various copy modes, press [Special
Features].
You can also place paper in the stack bypass to
copy. (For more information, see Chapter 2, “Making
Prints Using the Stack Bypass,” in the Reference
Guide.)
Placed in the feeder
Placed on the platen glass
Regular Copy Basic Features screen
If Department ID Management is set, press
(Log In/Out).
To cancel, interrupt, or continue copying
Press
(Stop).
To cancel copying
Press [Interrupt].
See “Interrupt Mode,” in the Copying and Mail Box Guide.
To interrupt copying.
Press [Done].
Place the next original.
Press
(Start).
To make another copy while
printing
Specify the Number of Copies
Place Your Originals
Start Copying
Preparations
7
8
9
0
4
5
6
7
8
9
0